Flickering lights are one of the more annoying things that you can deal with in your home. Instead of bright light illuminating a room, a flickering bulb halfheartedly lights up a space and can drive anyone crazy. Although super hard to ignore, flickering lights usually are no big deal besides being a nuisance. Sometimes, however, it can be a sign of a bigger issue. This article will break down some causes of flickering lights and whether you should be worried about them or not. If you’re not sure what the problem is, call your Northern Kentucky Electrician, Rose Brothers and Sons Electric.
Fluorescent and LED Lights
Some bulbs are more prone to flickering than others. Sometimes fluorescent lights will flicker for a few minutes when you just turn them on as they warm up, and some LED lights flicker when not properly connected to a driver or a dimmer switch. These are not serious issues so do not be too worried, but you may still want to replace the lights if the flickering gets too annoying.
Loose Bulb or Faulty Switch
Loose bulbs and faulty switches are two other reasons that your lights are flickering that do not warrant serious action to fix. For loose bulbs, turn off your light and once it has cooled down try screwing the bulb back in tighter. If the switch is acting up, try toggling it on and off or letting it sit for a while. If you turn it back on and neither of these quick fixes turn out to be the solution, then your problem lies elsewhere.
If your lights flicker when you turn on an appliance with high wattage, you could have a problem with your voltage fluctuating too much. Other signs are lights that seem to dim or frequently burn out. Electricity typically flows into homes at 120 volts and fluctuates between 115 and 125. You can check the voltage flowing through your home with a device called a voltmeter if you have one. If the average is outside of the 115 to 125 range, call an electrician and get some help.
Loose Electrical Wiring Causes Flickering Lights
Loose wiring is the most common cause of flickering lights and also a major cause of house fires. Shut off the light at the circuit breaker before removing the fixture, then double check the wiring. If it looks loose or insecure, you need to call an electrician. Or if even after this you still have not found the reason, call an electrician to figure out what the issue really is.
Now that you know what to look for when it comes to flickering lights, call Rose Brothers & Sons Electric, the best place for electrical repairs in Northern Kentucky.