All posts tagged hot tubs

A Short Guide to Wiring for Outdoor Hot Tubs

outdoor hot tub

After you have purchased a hot tub, your next step is installing the appliance. Water and electricity is a very tricky and hazardous mixture, and it is necessary to understand the safety measures that must be taken when dealing with this combination. Let Rose Brothers & Sons Electric of Walton, Kentucky help guide you through the process of wiring for outdoor hot tubs.

Where to Start

Hire an electrician or contractor who is well-versed with the National Electric Code and preferably one who has experience working with hot tubs. Many electricians have not mastered these codes and it is essential that you find someone who has proficiency in them for these projects.

Check Your Electrical Service

Before you purchase a hot tub, ensure that the electrical service panel can handle the extra load of your hot tub. Not only do you need to ensure that you have enough wiring spots available for your new hot tub, you need to make sure you have the proper amperage capacity to power your hot tub.

Protect Your Wiring

All the wiring that runs from your service panel to your hot tub must be protected. PVC pipes and metal conduits are the best choice for this protection. Make sure this wiring is protected well because damaged wiring can lead to hot tub malfunction or potential electrocution if someone is in the water.

GFCIs

GFCIs, or ground circuit interrupters are necessary for any hot tub. GFCIs shut off the power in your hot tub if there is ever a large surge that exceeds the circuit breaker capacity. To ensure that this safety precaution can perform adequately, it must be positioned at least five feet away from your hot tub.

What Not to Do

Avoid all powerlines. Many people do not think about the potential of power lines falling during storms and landing in your hot tub. While one would hope this was never an issue, ensuring that a powerline is not above your hot tub is the best way to prevent this occurrence. Underground wiring should not be used underneath hot tubs. All underground wiring should be at least five feet away from the location of the hot tub and buried at least six inches into the ground for metal raceways and at least a foot and a half for raceways that are nonmetallic. Do not install any low-voltage lighting within ten feet of your hot tub.

When it comes to electricity and water, it is best to let an expert handle everything. Hot tub installation requires a lot more thought about placement and wiring than other household electrical projects, and to ensure your safety, an expert installation is the best choice. At Rose Brothers & Sons Electric, serving all of Greater Cincinnati, Southern Indiana & Northern Kentucky, including: Florence KY, Ft. Mitchell KY, Villa Hills KY, Union KY, Ft. Wright, Hebron KY, Burlington, Covington KY, Erlanger, Independence KY, Ft. Thomas, Newport, Owenton, Park Hills, Cold Spring, Edgewood, Walton, Dry Ridge, Verona, Crittenden, Sparta, Alexandria, Glenco, Williamstown, we can ensure that all of your wiring is done properly and with all NEC guidelines being followed. If you need hot tub wiring, contact the experts at Rose Brothers & Sons Electric today. As an Angie’s List member with an A+ rating from the BBB, we can guarantee that our services will meet your needs.

Top
Page 1 of 1