All posts by rosebrothers

Electrical Wiring Basics

Poor electrical wiring is a dangerous situation. Bad wiring can not only lead to injury, but fires and even death. Working with electricity is a serious undertaking. Even home wiring, were the majority of wires carry a lower voltage than commercial buildings; must be handled with respect and attention to detail. Electricity is literally a life or death situation.

Electrician Slider 1

Besides safety and building/electrical regulations, you should become familiar with three basic components of home wiring. Those three components are the service entry, panel board and branch circuits.

Service Entry

The service entry is the point where the main electrical service line, from the main grid, enters your home. While you routinely check this area for any problems, the service entry is high voltage and should only be worked on by a qualified electrician.

Panel Board:

The panel board, also called the breaker box, is the central hub of your home’s electrical wiring. No matter what the job, from installing a new light switch to wiring in a new appliance, the panel board is where you can ‘flip the breaker’ and make sure the electrical current is off in the area that you are working.

Branch Circuits

Branch circuits are the different areas that are controlled by specific breakers in the panel board. The existence of panel boards and branch circuits allows the electricity to be turned off in certain areas and still be on in others.

The majority of home improvement jobs can be handled by the do-it-yourselfer, but when it comes to electricity, there is a fine line that determines when the professionals should be called in. Any time you are dealing with main power or running new electrical lines, it is time to call the pros. Not only do these types of additions need to be in compliance with safety and electrical codes, but the safety risk is too high to do this job yourself. Certified electricians are trained not only in the codes but in how to safely handle electricity and install/replace equipment as needed the correct way. While hiring an electrician may be the more expensive what to get an electrical job done, it is also the safest way and will allow you to sleep well knowing the job was done right and with safety in mind.

Rose Brothers & Sons Electric, 260 Old Nicholson Rd., Walton, Kentucky 41094, United States - Phone: (859) 746-9440 Email: rosebroselect@gmail.com
Top

Electrical Repair FAQ

1. What equipment does a homeowner need to fix simple electrical problems in Northern Kentucky?

If you have a bit of DIY knowhow, you should be able to fix most problems yourself. However, safety always has to come first. You will need basic tools such as a hammer, pliers, cutters, tape, and a screwdriver as well as a plug and electrical circuit tester so you can fix the more minor electrical problems within your home. If the issue is with an appliance that is not working, please contact us and we will direct you to an appropriate repair agency.

2. How do I reset my circuit breaker?

Have a look for the breaker which is fixed in the center. Then, be sure to turn the breaker completely off. You should get a tiny bit of resistance from the spring inside the rests. After you have felt this, start the breaker back up. Your power should be back in business but if not please contact us!

3. Can I change my outlets and switches on my own?

If this is a more minor problem and you have a quorum of electrical knowledge you can do it yourself. However, if the issue is more complex, contact us.

Safety is the first thing that should be on your mind when working around electricity so the first thing you should do is to turn the circuit breaker completely off. Do not do any work on a circuit with a current flowing through it. Most issues such as these are fairly simple to remedy. Consult your local library to get some books on the basics of electrical DIY.

When doing this process, remember that the longer slot on the outlet device has to be connected to the neutral, white wire. Conversely, the black, hot wire connects to the smaller end. The green, bare wire connects to the slot on the ground. You’ll need a plug tester to check they work after installing them. If you have any questions that need answering, call Rose Brothers & Sons!

Rose Brothers & Sons Electric, 260 Old Nicholson Rd., Walton, Kentucky 41094, United States - Phone: (859) 746-9440 Email: rosebroselect@gmail.com
Top

Northern Kentucky Outlets & Switches

Electrical safety tips

Northern Kentucky Outlets & Switches

Our trained, friendly Northern Kentucky electrical contractors can come to your home or office and troubleshoot any issue you may be having with your outlet and electrical switches. Our electrician’s vehicles are completely stocked for any potential problem to ensure that we have the proper tools to ensure the absolute best service for your home. At Rose Brothers & Sons Electric, we will complete all of your electrical work ourselves to guarantee a fantastic job for you. We always make sure we keep a clean working environment, leaving your home or office as clean, if not cleaner than when we arrived!

At Rose Brothers & Sons Electric, we have the ability to complete any kind of electrical outlet or electrical switch replacement. No repair is too small and with just a single call, Rose Brothers does it all! Get started today by getting in touch with our team of top-quality Northern Kentucky electricians.

Our Northern Kentucky Electricians Provide:

  • Outlets Switches
  • Wall Outlet Switch
  • Outlet Switch
  • Switch Plates Outlet Covers
  • Outlet Switches
  • Electrical Outlets And Switches
  • Outlet Switch Covers
  • Remote Outlet Switch
  • Light Switches
  • Electrical Outlet Switch
  • Outlet Switch Combo
  • Outlet And Switch Covers

Our Northern Kentucky Service Areas:

  • Florence
  • Covington
  • Taylor Mill
  • Villa Hills
  • Union
  • Newport
  • Independence
  • Hebron… and much more!

If you’re looking for a professional Northern Kentucky Outlets & Switches electrician, then please call us today at 859-746-9441 or fill out our online form.

Top

How to Save on Electrical Repairs

Every homeowner has to break down and make electrical repairs now and then. However, because electricity is hazardous, these are not safe projects for the DIY homeowner. Instead, you should hire a Northern Kentucky electrician. Want to know how to save on electrical repairs? Read these tips about getting the best value.

Combine electrical repair jobs

If you see that your house as a non-emergency electrical issue, add it to a list. If it’s not going to harm you or your loved ones, it can wait.

When it’s time to bring in a Northern Kentucky electrician, take a look at the list of jobs to do. Check all your outlets and switches and make sure that they work. You can save money by having them all done at once.

Prepare before the electrician arrives

The fewer hours your Northern Kentucky electrician has to deal with hassles, the more cash you save. Have the list of jobs ready, and check to make sure that the electrician can easily get to the circuit box.

Install fixtures that save money

By replacing incandescent bulbs with CFL’s, you spend a little more money now, but you trim those electric bills later, because you will use significantly less energy. Motion detector switches help trim your electric bill, because you save on the amount of time you actually use outdoor lighting while giving your home a security boost.

Give your Northern Kentucky electrician a call today!

Top

Electrical Safety Tips for the Holidays

With the holidays right around the corner, it’s time to start thinking about electrical safety. Christmas is wonderful time of year, but it comes at a great cost to your wallet. I am not talking about the food and gift costs that comes with the Holidays. Electricity bills skyrocket with the increase use of electric appliances, lights and special effects.

Plus, let’s not forget Santa’s visit with all the new electronic gadgets on Christmas day. Those news video game consoles and laptops need electricity too. With so many items using electricity, you might be worried about a surge as well as a high bill. The amount of electrical accidents do increase during the holiday season because of the surges and overheating. Many people are not aware of the amount of electricity they use until an accident occurs. Do not be one of those people. Here are ways to use electricity safely during the holiday season.

Do not over use extension leads.

When you are setting up your Christmas lights, do not plug in numerous adapters into one extension lead. They are not equipped to handle a large surge of electricity. Overloading the extension lead can lead to a shock or overheating that may result in a fire. Also, check to make sure your extension lead is not damaged. Check the cord for a split. A damaged cord can be just as dangerous.

Use outdoor extensions for outside

Many people do not realize that there are indoor and outdoor electric extensions. If you are setting up lights outside, you need to use plugs and extensions that are made for the outdoors. These extensions are waterproof, and they are made to survive the severe weather conditions.

Do not overcharge your electronics

If you leave your laptop or mobile phone plugged in when the charge is full, it can lead to overheating. Either unplug the electronics or switch off the plug.

Check your electrical cables regularly

Regularly check your cables for frayed wires or other damage that can be hazardous and life threatening. If you are in doubt that your cables are safe, call a properly qualified electrician to make sure you are not a risk.

If you are in Northern Kentucky, Rose Brothers and Sons Electric is the people to call to make sure your holidays are accident free.

Top

Emergency Electrician in Northern Kentucky

Looking for an Emergency Electrician in Northern Kentucky? Electricity is one of our most important utilities and when a problem occurs, having a trusted, trained professional in your phone contacts can come in very handy. Emergency electrical problems can and do happen from time to time. Choosing the right, emergency electrician is very important for your safety and pocketbook when an electrical emergency arises.

Happy Electrician

Choosing a Northern Kentucky Emergency Electrician

Choosing the right trained, trusted professional doesn’t have to be as big of a hassle as it sounds. Checking the web and doing a little research will give you many options. But, sometimes an emergency occurs where there isn’t time to source a proper contractor. This often leads to the cheaper option, which in turn can lead to poor workmanship and in the end an unsatisfied customer.

Hiring the right emergency electrician in Northern Kentucky can make the difference of a stormy night with power or a stormy night without power. Since we never know what mother nature is going throw our way, having the right electrical contractor on your side will pay off in the long run.

If you need the best Emergency Electrician in Northern Kentucky, call Rose Brothers & Sons Electric today! Our trained emergency electricians will be able to help with any of your electrical issues. Call us today to get started!

Rose Brothers & Sons Electric, 260 Old Nicholson Rd., Walton, Kentucky 41094, United States - Phone: (859) 746-9440 Email: rosebroselect@gmail.com

Route

Your location:

Top

Northern Kentucky Electrician

If you are looking for a reliable, experienced electrician in Northern Kentucky, please don’t hesitate to call Rose Brothers & Sons Electric. We are licensed, bonded and insured professionals that put safety first when handling your electrical needs. We pride ourselves on being meticulous and thorough in our work no matter how big or small the job may be. With the skills, experience and latest equipment, our highly trained electricians can guarantee nothing short of your satisfaction.

We are a locally owned and operated company that has been serving the local Northern Kentucky area for years. If you need an initial consultation, our professional staff will take as much time as needed to answer all of your questions and address any concerns. We work with extreme diligence to finish your project on time and within an agreed budget. Our pledge is our prompt project completion when dealing with your residential electrical needs. Some of the services provided by our Northern Kentucky electricians include commercial lighting, generators, lighting control systems, lighting repair and installation, service upgrades, electrical repairs, wiring and inspections.

Electrical Connection

Let our Northern Kentucky electricians be your choice for servicing all of your electrical projects. Whether you are a new customer or a long-standing client, our goal is to provide the most efficient and affordable comprehensive electric service.

For questions, consultations, estimates or to schedule an appointment, please call us today.

Why choose Rose Brothers’ Northern Kentucky Electricians?

  • We have up to 20 years of experience
  • We are locally owned and operated
  • We are fully insured/bonded
  • We are state licensed
  • We provide prompt project completion
  • Our staff is punctual and professional
  • We offer 24 our emergency services
  • 7 days a week
Top

Electrical Wiring Contractor

Finding an electrical wiring contractor is generally a hard job. However, without the right set of skills, trying to repair the electrical wiring in your own home often is a hazardous job. Deadly electrical shock, skin burns, and deadly electric shock can be the result of a lack of experience. Badly done wiring can also lead to issues with appliance shorts and electric fires. It is even possible that electrical fires can start fires and ruin your own home.
Typical Electrician Jobs at Home

These tips will help you reduce the chance of making any grave errors and will aid in the success of your project, however there is always the possibility of injuries. Below are a couple electrical wiring projects and some things to consider for each one.

Home Heating / Cooling System Wiring

If there is a problem with your HVAC system, you may think that it is an issue with your thermostat wiring. You may think to take the thermostat off the wall to take a look at the wiring inside the unit, but you should not tinker with thermostat wiring unless you are an electrical wiring contractor. Thermostat wiring is made up mostly of wires that control the unit itself, but within the thermostat there is often extremely dangerous wiring that can cause you grave danger if you are to touch it. You are best off leaving this wiring alone, and instead focusing on other areas to see if you can find an the issue with your home heating and cooling system.

House Fan Electrical Wiring

You never want your house ceiling fan to be powered from a dimmer switch, as the variation in voltage can be harmful to the ceiling fan and may start fire. An electrical wiring contractor can will be able to give you different options for modifying the way your ceiling fan works, and will give you the most options for your project. An electrical wiring contractor may install additional wires so that you may control the ceiling fan with one switch and the light with a second switch.

Top

Northern Kentucky Electrical Inspection

The Importance of an Electrical Inspection

A Northern Kentucky electrical inspection is an important inspection that will make sure your building has the safety standards needed. Electrical safety inspectors will use what is called the National Electric Code to determine if your building is up to code. This is required by your local government. An electrical permit is needed in order to fix electric issues or to complete electric installations. The majority of times an electric inspector is hired before the government inspection is done. This is done in order to make sure your electric has been properly installed. This inspection will determine that all electrical installation can pass code. This will also trouble shoot any problems before the state inspector does the final inspection.

Northern Kentucky Electrical Inspections

With all new buildings and construction an electrical inspection will be required. This inspection will most likely be required when purchasing a new property or when building an addition to an existing home. An inspection may also be needed when the electricity has been cut off for a long period of time. A licensed electrician in most cases must do the electrical inspections. In some cities they may have different requirements for licensed electricians. They may only accept licenses from that state or county. While other places may accept a national license from other states or counties. There are also some cases where a homeowner may do the work himself and have it inspected by an official. There are three types of inspections that take place during the installation of an electrical system. The first part of the inspection will take a look at the electric wires and electrical system. The second part of the test will see if the wires have been grounded and the service panel has been installed properly. The third part of the inspection will cover the breakers and to see if the electric works correctly. Before purchasing a new home it is a good idea to have the electricity inspected. This will determine if the home is up to code with the National Electrical Code system. When purchasing a new home it should be determined if that home can handle the amount of electricity that is needed and would also be able to handle an addition. This will save you money in the long run.

Route

Your location:

Rose Brothers & Sons Electric, 260 Old Nicholson Rd., Walton, Kentucky 41094, United States - Phone: (859) 746-9440 Email: rosebroselect@gmail.com
Top

Electrical Wiring Tips To Get You Started

Electrical wiring is something that strikes fear in the minds of some but is considered a piece of cake by others. If you are proficient when it comes to electrical items then you will know what goes where. A wiring connection is required for all cords, circuits, electrical panels and other types of electrical devices. If you have anything that is electrical in nature in your residence (and let’s face it who doesn’t in this day and age?) then you need to get acquainted with electrical wiring. Even if you just learn the basics and call in a professional for the rest then at least you will have a general knowledge that will serve you well over time.

If you own a home then there will be times when wiring issues will occur and you will have to do something about them. Wiring can be easy once you get the hang of it but first you have to learn what to do, how to do it and what tools you require to get the job done correctly. That is the goal after all- to make sure that the work gets done in the proper manner.

One type of electrical wiring that is common in many homes is appliance wiring. All appliances such as your oven, refrigerator, washer and dryer have connections. This is also the case for your smaller appliances such as your microwave oven, your toaster, your blender and your kettle. These appliances and others throughout your home all have outlets and breakers of different sizes. You need to have someone who is experienced in these areas to teach you how to connect the cord for your range or how to install the appliance you have always wanted to have – a dishwasher!

Some electrical wiring connections are important and necessary while others are not. You may be given a choice when it comes to what outlets or switches to use but in other cases there is only one choice that is the right one. When in doubt you can always get in touch with the manufacturer to ask questions or you can place a call to a professional who does wiring as a profession. Seeking out help when it comes to your wiring projects can make life so much easier!

You want the electricity flow in your home to work smoothly and to have no problems whatsoever. To make this a reality you need to make sure that all of the electrical components are connected to the right outlets. Not doing so could lead to a break in your electricity. Connecting the wrong items could also potentially cause you to be injured. You might want to learn how to wire an electrical meter and how to do the appropriate wiring for electrical panels.

Speaking of electrical wiring, the safety and security of yourself and of everyone in your household is extremely important. It is imperative for you to know what voltage accompanies each outlet. This is information that should be provided with an appliance when you purchase it. For instance some appliances have a voltage of 240 while others have 120 volts. This is something that you must pay close attention to.

About the Author

If you are in need of electrical wiring San Jose CA has a service that can provide a top-notch job for your home or business. For more information about this service, visit: http://www.smallmanconstruction.com/

Top
1 19 20 21 22 Page 21 of 22